Zobrazení zdroje stránky HP L2 Switche základní instalace

'''HP L2 Switche základní instalace'''

<pre>
<HP>system-view
System View: return to User View with Ctrl+Z.
</pre> 

Nepovine příkazy pro cisco aliass :-]

<pre>
 command-alias enable
 command-alias mapping display sh
 command-alias mapping save wr
 command-alias mapping undo no
 command-alias mapping quit exit
 command-alias mapping system-view conf
 command-alias mapping super en
</pre>
 

Nastavení  IP adresy z DHCP:

<pre>
[HP]interface Vlan-interface 1
[HP-Vlan-interface1]
%Apr 26 12:04:33:342 2000 HP IFNET/3/LINK_UPDOWN: Vlan-interface1 link status is UP.
%Apr 26 12:04:33:472 2000 HP IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface Vlan-interface1 is UP.
[HP-Vlan-interface1]ip add
[HP-Vlan-interface1]ip address d
[HP-Vlan-interface1]ip address dhcp-alloc
</pre> 

TEST

<pre>
[HP-Vlan-interface1]ping 172.20.2.10
  PING 172.20.2.10: 56  data bytes, press CTRL_C to break
    Reply from 172.20.2.10: bytes=56 Sequence=1 ttl=251 time=36 ms
    Reply from 172.20.2.10: bytes=56 Sequence=2 ttl=251 time=5 ms
    Reply from 172.20.2.10: bytes=56 Sequence=3 ttl=251 time=8 ms
    Reply from 172.20.2.10: bytes=56 Sequence=4 ttl=251 time=6 ms
    Reply from 172.20.2.10: bytes=56 Sequence=5 ttl=251 time=5 ms

  --- 172.20.2.10 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 5/12/36 ms
 
<HP>dir
Directory of flash:/

   0     -rw-  14586920  Sep 02 2013 09:28:03   a5120si-cmw520-r1513p62.bin
   1     drw-         -  Apr 26 2000 12:00:07   logfile

97920 KB total (82262 KB free)

</pre> 

aktualizac SW  ftp  serveru

<pre>
<HP>ftp 172.20.2.10
Trying 172.20.2.10 ...
Press CTRL+K to abort
Connected to 172.20.2.10.
220 INFO FTP server  ready
User(172.20.2.10:(none)):ftp
331 Password required for ftp
Password:@
230 User ftp logged in
[ftp] cd pub/hp
[ftp]dir
227 Entering Passive Mode (172,20,2,10,164,40).
150 Opening data connection
-rw-rw----   1 root     root     14595896 Jul 28 16:07 A5120SI-CMW520-R1513P89.bin
-rw-rw----   1 root     root         3311 Apr  9 16:34 lab-gw.key

</pre> 

Pozor nutno zapnou binární režim

<pre> 
[ftp]bi

200 Type set to I

[ftp]get  A5120SI-CMW520-R1513P89.bin

227 Entering Passive Mode (172,20,2,10,143,254).
150 Opening BINARY mode data connection for /A5120SI-CMW520-R1513P89.bin (14595896 bytes)
226 BINARY transfer complete
FTP: 14595896 byte(s) received in 77.905 second(s), 187.00K byte(s)/sec.
[ftp]bye
221 Closing
<HP>dir
Directory of flash:/

   0     -rw-  14595896  Apr 26 2000 12:07:53   a5120si-cmw520-r1513p89.bin
   1     -rw-  14586920  Sep 02 2013 09:28:03   a5120si-cmw520-r1513p62.bin
   2     drw-         -  Apr 26 2000 12:00:07   logfile

97920 KB total (68006 KB free)
</pre>

update  bootrom

<pre> 
<HP>bootrom update file a5120si-cmw520-r1513p89.bin slot 1
  This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
  Now updating bootrom, please wait...
  BootRom file updating finished!
</pre>


primární boot image

<pre>
<HP>boot-loader file a5120si-cmw520-r1513p89.bin slot 1 main
  This command will set the boot file of the specified board. Continue? [Y/N]:y
  The specified file will be used as the main boot file at the next reboot on slot 1!
</pre>
 
sekundární  boot image

<pre>
<HP>boot-loader file a5120si-cmw520-r1513p62.bin slot 1 backup
  This command will set the boot file of the specified board. Continue? [Y/N]:y
  The specified file will be used as the backup boot file at the next reboot on slot 1!
</pre>

Kontrola

<pre>
<HP>display boot
 Slot 1
  Current boot app is: flash:/A5120SI-CMW520-R1513P62.bin
  Next main boot app is: flash:/a5120si-cmw520-r1513p81.bin
  Next backup boot app is: flash:/a5120si-cmw520-r1513p62.bin
</pre> 

Nastavení membra ve stacku:

<pre> 
<HP>system-view
[HP]irf member 1 renumber 2
Warning: Renumbering the switch number may result in configuration change or loss. Continue?[Y/N]y
</pre>

první uložení konfigurace:

<pre>

<HP>save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
 Validating file. Please wait....
 Saved the current configuration to mainboard device successfully.
 Configuration is saved to device successfully.

</PRE> 

staženi nové konfigurace z TFTP serveru

<pre>
<HP>tftp 172.20.21.11  get ras-sw40-confg

  File will be transferred in binary mode
  Downloading file from remote TFTP server, please wait.../
  TFTP:    13786 bytes received in 0 second(s)
  File downloaded successfully.

<HP>dir

Directory of flash:/

   0     -rw-      2656  Apr 26 2000 12:12:36   startup.cfg
   1     -rw-     13786  Apr 26 2000 12:11:20   ras-sw40-confg
   2     -rw-  14595896  Apr 26 2000 12:07:53   a5120si-cmw520-r1513p81.bin
   3     -rw-  14586920  Sep 02 2013 09:28:03   a5120si-cmw520-r1513p62.bin
   4     drw-         -  Apr 26 2000 12:00:07   logfile

97920 KB total (67978 KB free)
</pre>

Aktivace stažené konfigurace

<pre>
<HP>copy ras-sw40-confg startup.cfg
Copy flash:/ras-sw40-confg to flash:/startup.cfg?[Y/N]:y
The file flash:/startup.cfg exists. Overwrite it?[Y/N]:y
.
%Copy file flash:/ras-sw40-confg to flash:/startup.cfg...Done.
</pre>

Restart z novou konfiguraci

<pre>
<HP>reboot
 Start to check configuration with next startup configuration file, please wait.........DONE!
 This command will reboot the device. Current configuration will be lost, save current configuration? [Y/N]:n
 This command will reboot the device. Continue? [Y/N]:y
#Apr 26 12:13:47:911 2000 HP DEVM/1/REBOOT:
 Reboot device by command.

%Apr 26 12:13:48:000 2000 HP DEVM/5/SYSTEM_REBOOT: System is rebooting now.
</pre>

Hotovo