Nastavení sítě: Hujer.Net

Verze z 20. 11. 2017, 23:34

MikroTik konfigurace

Směrování v síti

• Návody: Jiné

• RadiusServer

• Plex Srver

Terminal Commands

Mount the partition your Ubuntu Installation is on. If you are not sure which it is, launch GParted (included in the Live CD) and find out. It is usually a EXT4 Partition. Replace the XY with the drive letter, and partition number, for example: sudo mount /dev/sda1 /mnt.

sudo mount /dev/sdXY /mnt
Now bind the directories that grub needs access to to detect other operating systems, like so.


sudo mount --bind /dev /mnt/dev &&
sudo mount --bind /dev/pts /mnt/dev/pts &&
sudo mount --bind /proc /mnt/proc &&
sudo mount --bind /sys /mnt/sys
Now we jump into that using chroot.


sudo chroot /mnt
Now install, check, and update grub.

This time you only need to add the drive letter (usually a) to replace X, for example: grub-install /dev/sda, grub-install –recheck /dev/sda.

grub-install /dev/sdX
grub-install --recheck /dev/sdX

update-grub
Now grub is back, all that is left is to exit the chrooted system and unmount everything.


exit &&
sudo umount /mnt/sys &&
sudo umount /mnt/proc &&
sudo umount /mnt/dev/pts &&
sudo umount /mnt/dev &&
sudo umount /mnt
Shut down and turn your computer back on, and you will be met with the default Grub2 screen.

You may want to update grub or re-install burg however you like it.

Congratulations, you have just Repaired/Restored/Reinstalled Grub 2 with a Ubuntu Live CD!

Zpět na Hujer.Net